Transform Your Thoughts into Impactful Words: Make a Difference through the Power of Blogging!

5 Methods to Resolve Netgear Orbi Orange Light Issue with Ease

Netgear Orbi Orange Light
Netgear Orbi Orange Light

The ones who are reading this troubleshooting guide should know that if you are facing the Netgear Orbi orange light issue, it might be because of connectivity problems. But, worry not because below we have talked about some hacks using which you will be able to get rid of the issue at hand in a hassle-free manner. If you do not believe us, check the same out for yourself by taking a quick look at the hacks highlighted in this guide.

[Resolved] Netgear Orbi Orange Light Issue

  1. Restart the Orbi Router

Start troubleshooting the issue by implementing the easiest hack, i.e. restarting the device. In order to give your networking device a restart, it is recommended that you turn it off, hold on for some time so that your device can rest, and then, turn on the device. Now, you need to check if you are able to get rid of the orange light issue or not. If not, keep reading. We are hoping that the remaining hacks might be of assistance to you.

  1. Sync the Devices Again

Another reason why you are experiencing the Netgear Orbi orange light issue is because your Orbi router and the satellite are not in sync. Therefore, you need to sync them again. For this, pressing the Sync button on both the devices is required. By the way, whether you press the Sync button on the router first or the satellite, it will hardly make a difference.

  1. Check the Ethernet Cable

Taking into account that you are still reading this article, it can only mean one thing, i.e. the LED on your Netgear Orbi router is still blinking orange. It might be because the cable that is linking the router and the existing modem has cuts. Cables can get worn out over time. So, to take care of this, you have got to tape up the Ethernet cable. We are hoping that this will help you to step out of the mess that you are in because of the orange light issue.

  1. Update the Firmware

If it has been way too long since you last updated the firmware of your Netgear wireless router to its latest version, then it is recommended that you do so now. You can make use of two methods to execute this process. In the first method, you need to have a computer whereas n the second method, you need to opt for an application.

  1. Reset the Orbi Router

Despite following all of the aforementioned troubleshooting hacks, if you are still facing the Netgear Orbi orange light issue, then it is high time that you perform Orbi factory reset. This can be done if you locate and then, press the Reset button located on your networking device. Right after you have restored your Orbi to its default factory mode, set it up using any method that you like from scratch.

Final Note

These were the troubleshooting hacks through which the Netgear Orbi orange light issue can be resolved. You will be able to surely resolve it if you walk through the hacks given above with open eyes. Which was the hack that you found the most helpful in your case? In case, you want to share your answer with your fellow readers, use the comment section. Your fellow readers might appreciate the effort.

Related Posts