http // Not Working? Let’s Fix this!

http // Not Working? Let’s Fix this!

Are you facing issues while logging in to your Linksys extender via default web address, http // If you are nodding in yes, then there is nothing to get worried. In this article, we will provide you reasons along with the relevant solutions. Let’s get started!

Why http // Not Working?

Before you learn the fixes to troubleshoot the issue, learn what has forced you experience it. Look, knowing the reason causing the issue will make it a piece of cake for you to fix the issue while relaxing on your couch. Thus, scroll down a little to know the reasons behind non-working of the extender’s web address:

  • Typos in the web address
  • Poor WiFi connection
  • Technical glitches
  • Connectivity issues between your Linksys extender and router
  • Use of an outdated web browser

That’s all about the reasons! Without much delay, scroll down and follow the fixes outlined underneath to troubleshoot the issue.

Fixed: http // Not Working Issue

Fix 1: Check for Typing Errors

Hundreds of users across the make typing errors while entering the Linksys extender default web address when logging in to the device. If you are also one of them, then we suggest you rectify your mistake.
Simply cross-check the extender’s web address after entering it! In addition to that, make sure that you have not entered http // in the search bar.

Now, try to access the Linksys extender login page via web address and see if you are able to fix it. If not, then wipe out the browsing history and copy http // and then paste it in the address bar. If you do so, you will prevent yourself from doing typos.

Fix 2: Verify the Connection

Make sure that your WiFi range extender and your standard router are connected properly. If you have used a wire, then ensure that the ends of the wire and inserted firmly into the Ethernet ports of your extender and the router.
But, in case of wireless source, we suggest you place your devices in the same room

Fix 3: Check Your Internet Connection

Poor or weak internet connection is one of the major causes behind getting “http // not working” issue. To fix the issue, you have to get in touch with your internet service provider right away. Ask him to fix the slow internet issue for you as soon as possible. Also, you can also request the service provider of your internet connection to upgrade your existing data plan.

Fix 4: Update Your Web Browser

If you are still not able to access the web address of your Linksys WiFi extender, opt for updating the web browser you are using. So, to log in to your extender using the web address, it is recommended that you update your web browser right now.

Fix 5: Power Cycle Your Linksys Extender

Sometimes, technical glitches in the extender can also prevent you from accessing the extender’s web address. So, don’t get hyped! Instead take the plunge to power cycle your device.
Here are the instructions to execute the process

Step 1: First things first, disconnect your extender and the router.
Step 2: As soon as you are done with disconnecting your devices, unplug the extender and wait for a couple of minutes.
Step 3: Now, you can plug in your Linksys extender back and reconnect it to the router.
Step 4: Turn on a laptop or PC and have access to the extender’s WiFi network name i.e. linksys extender setup-xxx.

Try to access the extender setup page now via the web address!

The Last Words

Anticipating that the above-mentioned troubleshooting tips help you fix “http // not working” issue. On the off chance, you get the same issue in future, then without thinking much, give the same fixes provided here a shot.

Related Posts